NDT News

AWS CWI Exam Pass Rate: How to Pass (And What to Do if You Fail)

AWS CWI Exam Pass Rate: How to Pass (And What to Do if You Fail)The AWS does not post AWS CWI exam pass rate online. Yet, estimates say that only 30-40% of people who write the CWI exam pass the test on the first attempt. And because the exam costs $1065 in 2018, you want to pass this exam to avoid paying this hefty fee again.

Read on to learn how to pass the CWI exam the first time, and how to prepare if you need to retake it.

What Areas You Need To Know

A CWI exam is challenging. That's because a CWI has to be able to accurately complete welding inspections to specific codes.

A CWI has to have a good understanding of testing methods and drawings and specs. He or she must understand the welding process and be fluent in welding terms.

The CWI exam is comprehensive and covers all these key points. Make sure you review how to become a CWI with these 5 steps.

Create a Test-Taking Strategy

One of the most important things you need to do in order to pass the CWI exam is to have a test strategy.

You should know how much time you can spend on each question before moving on. The passing grade on this exam is 72%. That means that if you are stumped on a question, move on.

Each question is only worth 2.2% of the total exam. It is in your best interest to ensure you have time to complete the entire test than to spend priceless minutes on a tricky question.

Check Your Work

Part 3 of the test is open book. You will be able to use the code book to look up answers.

Don't make the mistake of being overconfident and skip looking up the answer in the codebook. The examiners allow the book for a reason. Codes can be difficult and there is a lot of information.

Verify your answers each time to avoid losing marks in this section.

Know What You Don't Know

If you are unsuccessful the first time you take the CWI exam, don't despair. You have options. You can retake the entire test or just specific parts such as Part A.

Before preparing for your second attempt, carefully review where you went wrong the first time. You will be able to see your score for each of the 3 parts of the exam on your CWI test results.

If you scored an average of over 72% in total but got less than 72% on only 1 part, you may retake only that part.

Besides looking at just your score, also look at the topics you struggled with. then you can focus on brushing up your knowledge on those key areas.

Final Thoughts on AWS CWI Exam Pass Rate

Thank for reading! We hope you found this guide on the CWI exam helpful. Remember, just because the AWS CSI exam pass rate is low for first-time test takers, there is no reason you can't ace the test if you prepare and plan your strategy.

Next, review these 5 tips to help you pass the CWI exam.

Continue reading
  107 Hits
107 Hits

How Hard is the CWI Exam? Your Questions Answered

How Hard is the CWI Exam? Your Questions AnsweredWhile many industries, manufacturers, and skilled laborers have seen a drop off in their workforce in recent years, welding isn't slowing down. If anything, there's never been a more competitive time for commercial welders to be looking for a role. When you take the CWI exam, you put yourself above other welders by showing you know what you're talking about.

Here are four things to know before you take your exam.

1. You Need Practice

During Part A of the CWI test, you're going to have to do some practical work to show that you know what you're doing. As a commercial welder, you'll have to know how to make clean, clear welds and be able to manage your time.

If you're out of practice or you've been doing one kind of job for a long time, you should do some practice. Take a practice test because you're going to have to show off your practical skills.

2. Know Your Codes

The last part of the test will be a written exam that tests you on your knowledge of safety codes and the details of what it means to weld safely. If it's been a while since you've looked at them, take some time to freshen up on your knowledge.

While you might not think these elements are important if you're not an inspector, you need to anticipate inspection on every project. When you know what they look for, you can ensure you've done a good job that will safely and easily pass an inspection.

3. You Need To Work Under Pressure

Working under pressure isn't for everyone but if you want a good score on your CWI exam, you're going to have to work efficiently. You'll be timed for each section of your test and so you should spend an adequate amount of tie studying.

If you haven't taken a test in a long time, you might have to put together a test-taking strategy. Learning what's required of you will help you anticipate what problems you might have and allow you to perform on the day of the test.

4. Learn What an Inspector Does

Part B of the test will put you in the shoes of an inspector and quiz you on some of what inspectors look for. You should know what a good weld looks like and how to inspect welds on your own. This will ensure instructors that, as a welder, you'll be performing welds that you think an inspector would approve.

When you're working as a commercial welder, you could create load-bearing welds that inspectors might pass over or never see. Rather than try to get away with a bad weld that puts people in danger, this part of the test will ensure you know what a strong, clean weld should look like.

Your CWI Exam doesn't have to be hard.

While you might be intimidated by taking your CWI exam, it won't be hard if you're well prepared. The trick to doing well on this test is studying, practicing, and practicing again.

If you want to know exactly how to pass your exam, check out our latest guide.

 

Continue reading
  95 Hits
95 Hits

Search